Technical Information | Catalog | Design a Brush | Contact Us | About Us | Home
Staple Set
Metal Strip
Twisted in Wire
Ferrule Brush
Fill Material
staple set
metal strip
epoxy set
hand drawn

Use this page to design a brush specific to your needed task. Click on the icons above for more information about a specific manufacturing process or brush type.

Staple Set is the process of placing staples into a drilled block to hold fill material.

Metal Strip is the process of crimping metal over the fill material, that is being held in place by a center wire.

Power brushes are brushes that can be attached to a piece of machinery, and rotated at variable rpm's.

Twisted Wire is a process that takes at least two wires and twist them together, which fans out the fill material.

Ferrule brushes (Paint and artist brushes) are mainly used in applying some type of paint or ink.

Ultrasonic welding is a process that involves high frequencies of sound to weld the base to the fill material.

Epoxy set is a process that uses an epoxy to secure the bristles to the block.

Fused is a process that takes large amounts of heat and fuses the block and fill material together.

Hand drawn brushes use a process that involves manually feeding the bristle and wire through each hole of the brush.

If you have any more questions or comments about the products that we offer please contact us, at our contact page.

Contact Us