Technical Information | Catalog | Design a Brush | Contact Us | About Us | Home
Staple Set
Metal Strip
Twisted in Wire
Ferrule Brush
Fill Material
staple set
metal strip
power
twisted
ferrule
ultrasonic
epoxy set
fused
hand drawn




tube
power tube
side action
burr
condenser
flue & boiler
fitting

 

 

Twisted-in-Wire

Primarily used for cleaning and dressing inside cylindrical surfaces. The fill material of a twisted-in-wire is held between two or four wire stems. As the wire is twisted the brush takes on a spiral shape and the fill radiates in all directions from the stem. Brushes vary in diameter from .020" to 4" in diameter. Lengths of the brush can be custom made from 1" to 4 feet. Fill material is somewhat limited by the size of the diameter of the core wire but is very flexible. Fill material will vary depending on the stem wire diameter. Typically fill material runs from .003 to .014 in diameter. Wire could be carbon steel, Stainless, brass, bronze. Natural fill could be tampico, horsehair, China bristle. Synthetics include polypropylene, nylon, abrasive nylons, polyethylene and polystyrene.

Tube Brushes

Power Tube Brushes

Side Action Brushes

Burr Brushes

Bottle Brushes

Condenser Brushes

Flue and Boiler Brushes

Fitting Brushes